Resume Electrical Engineer in Pakistan Islamabad

15 years of diverse experience in Oil & Gas plant Maintenance, Planning, Execution & Operation, Installation, Testing & Commissioning, troubleshooting, repairing, material inspection, Annual Turn Around, spares & Inventory Management. Introduced preventive maintenance plans of around 1200 E&I equipment for 02 plants and 28 well sites in Maximo IBM. Resulted in improvement of maintenance rate by 20% Hands on experience of 17 annual plant turnarounds of 450 MMSCFD gas, 20,000 BBL Oil, 15,000 BBL Condensate, 550MTPD LPG Production plants Steered successful execution of over 10 major projects aimed at plant production enhancement and reliability Adept in budgeting, spares procurement & inventory management. Proficient in CMMS, asset management and material management modules Rolled out in-house rectification initiatives for cost cutting enabling employer to reduce repair and replacement cost by an average of $150,000 / annum. Strict adherence to HSE compliance & safety regulations. Awarded 05 times with the Safety Champion Award by ensuring a safe work environment Recognized as a subject matter expert with the ability to train and mentor young engineers & technicians in the development and implementation of strategies that consistently achieve desired results. Supervise high-performance team of 20 electrical technicians with major emphasis on employee safety, quality, and productivity. Well versed with electrical safety rules & international standards; BS, IEEE, NFPA, IEC, and AGA PROFESSIONAL EXPERIENCE MOL Pakistan (Hungarian Multinational) Oil & Gas, Co. B.V Electrical Engineer Sep 2016 – Current Lead Foreman Electrical Mar 2015 – Sep 2016 Sr. Electrical Technician Jun 2013 – Mar 2015 Electrical Technician Jun 2010 – Jun 2013 Joined MOL Pakistan Oil & Gas Company as an Electrical Technician and subsequently progressed to the position of Senior Electrical Technician. Later, I was promoted to Lead Foreman Electrical. Upon completing my engineering degree in 2016, I was promoted to the role of Electrical Engineer. I am currently serving as an E&I Engineer in the maintenance department. Roles & Responsibilities includes the following: Roles & Responsibilities:  Efficiently execute maintenance planning utilizing the CMMS (Computerized Maintenance Management System), schedule work orders, assigned priorities, and ensure on-time closeout.  Lead the execution of preventive & corrective maintenance, overhauls, and extraordinary maintenances on 2.5 MW Waukesha Gas Powered Generators (03 Units), 1.6 MW CAT Gas Powered Generator (03 Units), 1 MW & 292KW Caterpillar Diesel Powered Generators (02 Units)  Efficiently execute and supervise preventive & corrective maintenance on 6.6KV MV and 415V LV Schneider Electric Switchgears (MCset 17.5KV & BLOCKSET Series), 415V ABB LV Switchgear (SACE Series), 2.5 MVA & 1.5 MVA ABB Power Distribution Transformers, 150 KVA & 300 KVA ABB Dry Type Isolation Transformers  Maintain optimum operation and performance of GUTOR 30KVA, 40 KVA & 80KVA AC UPS and 10KW & 35KVA DC UPS system  Oversee the operation, maintenance, troubleshooting, and modification of PV-solar power systems and battery banks installed across all 25 remote wellhead sites, ensuring optimal performance and reliability.  Ensure and strictly comply to electrical LOTOTO (Lock Out- Tag Out- Try Out) procedure for Electrical Isolations. Test and verify the electrical power and control schematic drawings and loops of Transformers, Switchgears, & Relays  Efficient in utilization of advanced Electrical meters and testers for fault finding and maintenance. Ensure effective monitoring and thermography of Motors, Generators, Transformers and LV/MV switchgears as per plan. Responsible for troubleshooting of power plants, substations and overhead Transmission lines.  Ensure 100% compliance of health and safety standards (HSSE) & permit to work system.  Conduct HAZOP and value-engineering studies to guarantee the safety, performance, and reliability of equipment.  Steer weekly/monthly HSE safety audits ensure close out of open punch points identified as hazards.  Evaluate vendor proposals & design documents as per the specifications laid out in the RFP document and engineering codes ensuring compliance to the highest of safety standards and design criteria.  Ensure availability of updated maintenance history/documents/drawings for fast consultation.  Carry out root cause analysis (RCA) of repeated & recurrent failures on plant equipment & execute corrective actions/modifications.  Review, monitor, and update maintenance plans of equipment. Evaluate technological up-gradation of outdated equipment and shared recommendations for onward implementation.  Complete periodic revision of SOPs, electrical maintenance codes of practices, procedures, and guidelines in compliance with safe working conditions and technical excellence.  Implement process safety and risk management objectives by practicing it through participation in Management of Change (MOC), Process Hazard Analysis (PHA), and Pre-Startup Safety Review (PSSR).  Develop scope of work, budget allocation plan, selection, and sizing, ordering of material, execution, and timely closeout details. Compile and submit reports for all in-house projects.  Ensure all electrical tasks and maintenance processes are in line with company's standard considering safety and environmental best practices.  Inspect the work done by the contractor to ascertain that work is executed in accordance with the Contract Documents and accepted practice. Monitor the progress of the work against the approved contractor program of works MAJOR PROJECTS & ACHIEVEMENTS  6.6kV MV Transmission Line: Key participant in the erection and commissioning of a 6.6kV MV transmission line for the Produced Water Treatment Injection (PWTI) facility, an in-house project that resulted in $250,000 in annual savings and won the "Project of Tomorrow" award across the entire MOL Group.  Makori Gas Plant Facility: Engaged in the erection, commissioning, loop testing, and startup of the Makori Gas Plant Facility.  Load Shedding Scheme Implementation: Played a crucial role in implementing the Load Shedding Scheme for the Makori Gas Plant, significantly reducing downtime.  Central Front End Compression Facility (CFECF): Contributed to the erection and commissioning of MCC and VFDs.  LTMR TeSys-T Motor Management System: Involved in the implementation of the LTMR TeSys-T motor management system for LV motors at MGPF.  VFDs Installation for Produced Water Transfer and Injection Pump Motors: Contributed to an in-house project for the installation of VFDs up to 400kW, optimizing the performance of produced water transfer and injection pump motors.  Spline Ball Lightning Protection System: Participated in the erection and commissioning of the lightning protection system for fuel storage tanks.  AC and DC UPS Systems: Assisted in the erection and commissioning of UPS systems up to 80KVA, ensuring reliable power for critical plant loads.  Wellhead PV-Solar Power Projects: Successfully led the erection and commissioning of 25 wellhead solar power photovoltaic (PV) projects for RTU/CP systems, demonstrating expertise in sustainable energy solutions for critical infrastructure.  PV-Solar System Battery Bank Monitoring: Successfully installed and commissioned a solar system battery bank voltage monitoring system for wellheads and valve assemblies, ensuring reliable and efficient power management for critical field operations.  MGP Cost and Load Optimization Project (Transition to PV-Solar Energy): Spearheaded the transition to green energy PV-Solarization for MGP, achieving $150,000 in annual savings.  PAGA System & Hooter Integration: Assisted in the commissioning of the Public Address and General Alarm system and hooter integration.  Fire Protection Systems: Involved in commissioning Fire Alarm Control Panels, Fire Suppression and VESDA systems.  Pipeline Intrusion Detection System: Contributed to the installation of a 150KM Pipeline Intrusion Detection System Optasense UK.  CCTV & Anti-Intrusion Systems: Participated in commissioning surveillance systems for facility perimeters.  Access Control Systems: Assisted in installing and commissioning the Case Badge Access Control system.  H2S Analyzer Communication: Contributed to installing a communication system for the H2S analyzer meter skid.  Landline Communication Systems: Participated in the erection and commissioning of PABX exchange systems.  Radio (VHF) Communication System: Assisted in the commissioning of the VHF radio communication system.  FOC/LAN Industrial Networks: Involved in installing and commissioning Fiber Optic Cable and Local Area Network industrial networks, Communication switches and Media converters for WHs/VAs/plant communication

BE ELECTRICAL ENGINEERING

6.6KV MV and 415V LV Schneider Electric Switchgears (MCset 17.5KV & BLOCKSET Series) • 415V ABB LV Switchgear (SACE Series) 2.5 MW Waukesha Gas Powered Generators (Model: 12V75GL+) • 1.6 MW CAT Gas Powered Generator (Model: 3516C) • 1 MW & 292KW Caterpillar Diesel Powered Generator (Model: 1400F & D3406C) • WEG Alternator (Model: SPI 710) • CAT Alternator (Model: SR-4) • 2.5 MVA & 1.5 MVA ABB Power Distribution Transformers • 150 KVA & 300 KVA ABB Dry Type Isolation Transformers, GUTOR 30KVA • 40 KVA & 80KVA AC UPS • GUTOR 10KW & 35KVA DC UPS • 6.6KV MV Transmission lines • Fire Alarm Systems (Make: Apollo) • AVATRON 1 MW & 2.5MW Load Banks • ABB, Siemens & Baldor LV Induction Motors (Hazardous & Non-Hazardous Area Classified) (Up to 400HP) • TeSys T Motor Management Sys. (LTMR Series Relays) • Switchgear Protection Relays (SEPAM Series) • Generator Protection Relays, (Woodward MCGDV41 Series & GE SR489 Series) • Generator Synchronization Controllers (Woodward Easygen 3000 Series) • Variable Frequency Drives (Altivar 61 & 71 Series) • Wellhead Solar System (PV) (Make: Micha Solar, Tri- Star, STECA) • Spline Ball Lightning Protection System• Pipeline Intrusion Detection System (Make: Optasense UK). COMPUTER SKILLS Microsoft Office, IBM MAXIMO, KELTON, MON2000, MON2020, Waukesha ESP, CAT ET, Woodward Smart View SE, Woodward Toolkit, Protection Relays (SEPAM, GE, Woodward, SR-489), PABX TED console 200/600, FACP loop-explorer, Ocularis 6.3.0 VMS & IDS

English Hindi

PROFESSIONAL COURSES/TRAININGS  Selection, commissioning, operation, Maintenance & troubleshooting of Electrical Equipment |Al Khobra Istanbul-Turkey | Sep. 2022  Electrical Generators, Excitation, and Governing Systems by Power EDGE Energy Institute Middle East VILT | 2021  Certificate of Recognition Power Transmission Project | Dec 2021  Reliability and Rectification of Critical Process Equipment | Islamabad | 2017  First Aid, CPR & AED Training | American Safety & Health Institute HSI Company | 2024  Advance Firefighting Training | Fire Protection Association of Pakistan FPAP | 2010  MCSE (Microsoft certified system Engineer) | Peshawar | 2007  HSE Trainings, IT/IS Awareness, Permit to Work System, Advanced Communication Skills | MOL Pakistan Oil & Gas Co. (In-House Sessions)