Resume HSE in Nigeria Port-Harcourt

Work Experience Mamtech Services Ltd. From 5th April 2022 to 24th May 2022. Designation: Safety/ PTW Officer Client: Nigerian Agip Oil Company(NAOC) Duties & Responsibilities:  Strict Adherence to and implementing client’s(AGIP) HSE policies, rules and procedure on site.  Verifies that all tool and equipments are adequate and safe for use.  Inspects site to ensure a hazard free work environment.  Conducts toolbox talk for workers from time to time.  Daily Observation and report of near miss, unsafe act and unsafe condition at site.  Ensures adequate housekeeping is carried out within site and disposed in line with Environmental Policy. Prepares PTW (permit to work) for new operations. Participates in HSE meetings and follow-up resolutions of such meetings.  Ensures the provision, maintenance & replacement of safety equipment. Monitors work permit system, checks work in progress and work permits to ensure proper filling up and closing of permits. Daewoo E & C Nigeria Limited (DNL 64) From 1st April 2015 to 11th December 2015. Designation- Safety Officer. Duties & Responsibilities:  Daily safety inspection of the site to identify the hazards, unsafe conditions and acts.  Conducts regular tool box talk to enhance QHSE knowledge and awareness among staff.  Monitors and implements all safety rules at site.  Ensures compliance with client safety requirement at site.  Periodic inspection of Power Tools.  Evaluates and ensures proper using of PPE.  Checks all Scaffolding and fall protection.  Periodic inspection of Fire fighting Equipments.  Ensures safe working practices at site.  Monitors the effectiveness of existing safety standards.  Periodic inspection of Lifting Equipments.  Monitors work permit system, checks work in progress and work permits to ensure proper filling up and closing of permits.  Maintains good quality audit system for construction machineries such as heavy equipments, cranes, trailers, excavators, loaders, forklifts, etc. Laser Engineering and Geoscience Co. Nig. Ltd. (2012 – 2014) Designation – Health Safety & Environment (HSE) Supervisor Responsibilities:  Assisted in the preparation and management of annual HSE Objectives.  Conducted HSE inspections and tours in the office and fabrication yard.  Supervised construction activities at project work sites.  Prepared PTW (permit to work) for new operations  Attended client’s project kick off meetings.  Organized HSE inductions/presentations for new employees in the company before site mobilization.  Ensured regular emergency response exercises and drills are conducted to ensure the highest level of preparedness in any emergency.  Maintained records of drills, providing recommendations for emergency response improvements.  Prepared written weekly and monthly HSE reports, statistics and presentations related to HSE performance.  Reviewed and analyzed accidents and near miss incidents and made corrective action/ recommendations.  Coordinated tool box talks on site.  Participated in HSE meetings and follow-up resolutions of such meetings.  Ensured the provision, maintenance & replacement of safety equipment.  Carried out HSE Inspection/Audit: workshop & stores Inspection, scaffold & working at height Inspection, Blasting Inspection, etc.  Reported anomalies and prepared daily/weekly HSE report.  Ensured good housekeeping and waste management. Major Projects in Laser Engineering and Geoscience Co. Nig. Ltd. OML 58 Shutdown: Pig Launcher Decommissioning & Installation of ESDV & SDV on Oil Export Line at Obagi, Ogbogu Flow Station (TOTAL E&P) OML 100: Replacement of corroded spools phase II (Edikan TOTAL E&P) OML 100:Replacement of Corroded Spools on AFD1offshore Platform (Total E & P Nigeria Limited) Atlantis Petroleum and Chemical Company Nig. Ltd. (APCCL) From November 2010 to September 2012. Designation- Health Safety & Environment (HSE) Officer Achievements:  Coordinated tool box talks on site.  Participated in HSE meetings and follow-up resolutions of such meetings.  Prepared PTW (permit to work) for new operations.  Carried out quantified safety audit in accordance with procedures.  Facilitated safety campaign and site HSE training program.  Supported field job planning process and made HSE input.  Ensured that all operations/activities on the platform are performed in line with the shutdown requirement.  Ensured the provision, maintenance & replacement of safety equipment.  Carried out regular HSE Inspection of site and work places to determine whether work is being carried out in accordance with health and safety procedures.  Supervised scaffold erection and dismantling works.  Made sure that all erected scaffolds were tagged safe for use by a Scaffold Inspector before personnel could work on them.  Ensured that all personnel wore the necessary PPE such as Safety harness and fall arrestor during scaffold operations.  Ensured the availability of a stand by boat during outboard scaffolding works.  Ensured sensitive equipment on the platform such as pressure and temperature gauges were properly covered with tarpaulins. Also ensured containment of the platform gratings and surroundings to avoid scattering of the spent grit particles.  Ensured all personnel involved in blasting and painting operation wore the appropriate PPE including nose mask, blasting suits and hoods.  Supervised painting works using the three coat repair system and ensured the painting of each zone on the platform was done in accordance with the company specification.  Responsible for sending daily reports including pictorial reports of each day’s activities.  Updated the Project Work Breakdown Structure (WBS) daily to reflect progress of work activities made each day.  Reported anomalies and prepared daily/weekly HSE report.  Participated in the supervision of emergency response drills on site  Ensured good housekeeping and waste management  Inspected equipment, structures, and work in progress for compliance with applicable health and safety standards and specifications.  Reviewed accidents and incidents to determine cause and implemented plans to prevent reoccurrence.  Handled follow up on work permit systems and inspections, planed safety arrangements for Erection work.  Maintained General information report, Hazard condition and other requirements like equipment needs for first aid, PPE’s etc.  Monitored site activities for compliance with health and safety guidelines.  Implemented (PSSR) Personal Safety & Social Responsibilities in the minds of employee.  Familiar with air, water, and solid/hazardous waste at an industrial facility.  Ensured the standards of Emergency services like Fire Extinguishers, First Aid Box.  Monitored implementation and enforcement of safety requirements.  Expertise in hazard identification, risk analysis, risk assessment and job safety analysis. Juztad Energy Service Limited December 2009 – August 2010 Designation- Health Safety & Environment (HSE) Officer Responsibilities:  Supervised the HSE aspect of all workshop and site activities.  Monitored and enforced compliance of PPE, PTW and JSA.  Examined cases of incidents/accident investigation and reporting.  Conducted HSE inspection at site.  Reported unsafe conditions and unsafe acts and ensured close out.  Ensured HSE procedures are implemented on site.  Organized weekly tool box talks. Major Projects in Juztad Energy Service Limited  Blasting and painting of FSO UNITY Telecom mast and Helilounge (TOTAL E&P)  Fabrication and Installation of Sampling point on Exhaust stack of Turbines, compressor And Generators at Obite and Ogbogu Flow Station (TOTAL E&P)  Fabrication and Installation of 12’’ x 20 km Ogbele- Rumuji Gas pipeline project(NIGER DELTA PETROLEUM RESOURCES)  Fabrication of 500 Barrels storage Tanks (JV RESOURCES Project)  Installation of filter access platform (Blasted & Painted) at the Gas Turbine area,( TEPNG Main Base PHC)

Education Federal University of Technology Owerri, Imo State. B.Tech. (Hons.) Environmental Technology 2007 Ihenworie Secondary School, Ahiara, Imo State. Senior School Certificate—WASSC & NECO 2002

Skills & Competence • Ability to express technical information in a creative and simple manner. • Honest, hardworking and reliable, ability to work independently and as part of team with minimal supervision. • Skilled in data reading and interpretation. • Able to work to tight schedules. • Excellent communication and interpersonal skills. • Strong customer service skills. • Ability to maintain confidentiality

English

Training/ Certification NAOC HSE Competence Assessment Certification 2022 Safety Training Certification for watch keeping and seafarers. 2012 Coastal Maritime Academy, Ikoyi Lagos. Oil and Chemical Tanker Cargo Operations. 2012 Coastal Maritime Academy, Ikoyi Lagos. Contractor Employee HSE Competence training programme (Level 3) {Nigerian Institute of Safety Professionals (NISP)} 2007