Technical Specialist / Construction Technician / Civil Enginee
Construction - Renovation - Architecture
Experience:
MC-BAUCHEMIE (building industrial technology) [10.2020-Present] https://www.mc-bauchemie.ru
MC-Bauchemie has been in existence for more than 55 years and is one of the world's leading manufacturers of building materials and a developer of technologies for their effective use.
Technical Specialist
• Implementation of pilot sites at construction sites with a demonstration of building materials and systems
• Technical support of work at construction sites
• Production of product samples
• Testing of materials
• Consumer advice
• Processing claims
• Conducting master classes and trainings
• Work with injection equipment, application of coatings by hand/machine methods, performance of a full range of works on the application of polymer floors, work with polymer compositions, use of machine application equipment, demonstration of materials and their systems
• Elimination of active water filtration in buildings
• Implementation of personnel certification (quality standards when working with building materials)
• Repair of cracks in concrete
• Knowledge and experience with various types of injections using epoxy and polyurethane materials
• Repair and protection of concrete
• Epoxy and polyurethane resin flooring systems
DAW (Deutche Amphibolin-Werke von Robert Murjahn" (leader in the production of paints and varnishes and
solutions for facades) [06.2017-09.2020] https://www.daw-se.ru/
Founded in 1895 in Germany. The German company DAW is one of the largest European manufacturers of paints and
varnishes and building materials, thermal insulation systems for facades, flooring, decorative materials for
creative interior design.
Technical Specialist
Elaboration of design solutions and performance of calculations in order to agree / renegotiate materials
or constructs
Development and updating of technical regulations and guidelines for the use of materials
Introduction of new technical developments of the Company
Conducting technical seminars for design and construction organizations, employees of distributors
Claim handling
Implementation of construction quality control
Reading design estimates
Working on high-tech tinting equipment, making samples
Knowledge at a high level of normative and regulatory documentation (interior decoration, facade)
Participation in production and business meetings
Execution of experimental sites at construction sites with a demonstration
Technical support of works on objects
Production of product samples
SAINT-GOBAIN (The company develops innovative solutions for construction, renovation, industry and
transport.) [02.2015-05.2017] https://saint-gobain.ru/
Key account manager
I Worked for a separate division of Weber-Vetonit, which is a world leader in the development of innovative
integrated solutions for construction and renovation
Maintaining active sales in the assigned territory in the areas of DIY and B2B
Site visits, orientation of the Customer to make a decision in favor of our building materials
Optimization and introduction of building materials, ready-made solutions into the construct.
Selection of technical solutions based on the requirements of the Customer
Search of new perspective dedicated distributors, dealers and agents
Control of supply of materials.
Registration of products;
Preparation and participation in state tenders;
Organization of presentations, holding master classes.
Control of merchandisers in large chain stores
Private Practice / Freelancing [03.2012-01.2015]
Builder-finisher
Repair, construction, decoration.
Performance of repair and finishing, construction works (apartments, houses, commercial premises)
Coordination of project documentation with the customer
Quality control in the field of general construction works, installation of engineering equipment, finishing works.
• Drafting and signing of acts of work performed
• All types of finishing construction works (Drywall, tiling works, plastering, plumbing, painting
works screeds, levelers, linoleum, laminate. Partitions and other types of drywall work
Education:
2013 St. Petersburg College of Economics, Management and Law.
Qualification: lawyer, jurisprudence
2017 Baltic State Technical University VOENMEH them. D.F. Ustinov,
St. Petersburg. Qualification: Engineer of weapons and weapons
systems, Small arms, artillery and rocket weapons
2020 St. Petersburg State University of Communications, St.
Petersburg Industrial and civil construction, POSTGRADUATE
Building materials and technologies
Skills:
*Knowledge and experience with complex
construction equipment (pumps, stations
and other equipment) work with injection
equipment, applying paintwork materials
by hand/machine, performing a full
range of works on applying polymer
floors, working with polymer
compositions, using machine application
equipment, demonstrating materials and
their systems;
* Experience in hydraulics, knowledge of
the basics of mechanics, pneumatics
* Development and adjustment of
technical documentation
* Organization and holding of technical
seminars
*Architectural supervision of the
compliance of the materials and
technologies used in the construction of
the supervisory facility
*Knowledge and use of all building
material
Additionally:
I am an educated and self-confident person focused on results. Constant desire to develop and increase specialization and experience. A high level of responsibility and independence, excellent skills in planning my working time, I have experience in managing construction teams as a foreman. Active lifeposition, desire to develop mutually beneficial with the organization. Result Oriented. I have experience
in finishing works in construction.
Working with injection equipment, applying paintwork materials by hand/machine, performing a fullrange of work on applying polymer floors, working with polymer compositions, using machine
application equipment, demonstrating materials and their systems.