Resume land surveyor / architectural inspector in Qatar Doha

WORK EXPERIENCE Louise Berger / WSP 974 & LUSAIL STADIUMS Location: Doha, Qatar Job title: Land Surveyor Duration: March 15 2018 up to December 2022 Work scope: Survey works in civil, structural, architectural, MEP, Road works, utilities & Infrastructures survey works. Roles and Responsibilities: • Inspection of the Establish control point by third party contractor. • Review of shop drawings, CCTV survey of foul and storm water line, ITP, method statement by comparing to IFC, project specification, QCS 2014, Qatar survey manual. • Verification, monitoring, and final inspection of work executed by the contractor as per approved shop drawings, IFC, project specification, QCS 2014 • Survey inspection of all alignment, level, location and dimension as per approve shop drawing, IFC, project specification, method statement, ITP and according to tolerances and accuracy. • Ensure safety of the workers working on site. • As-built survey inspection of installed container. • Survey inspection for the erected columns, beams, bracings. • Initiating calculation of erected steel column beams bracings for identification of radial and tangential direction deviation in comparison with the inspection done on site. • Closing and checking of inspection request of work. • Inspection of concurs panel slab in all floor level • Inspection of erected steel elements. • Inspection of pre-fab truss, backstay, and horizontal strut and v-strut • Inspection of stacked container on erected elements. • Quantity verification on site of work done by contractor. External works- Inspection of topographic survey, sub-grade, Kerb stone, tie-in connection, road base, asphalt level contour, evenness, profile and cross slope, CCTV survey witness, foul and storm water alignment, linear drainage, swale contour levels, embankment and buffer area, ICT line, JRC chamber, multipurpose pole, alignment of 30m high mast pole and its light aiming angle, project site limit boundary. Swansea Surveys Qatar Rail Gold line Location: Doha, Qatar Job title: Land Surveyor Duration: August 9, 2017 up to February 20 2018 (7months) Work scope: Survey works in civil, structural, architectural, MEP, Rail tracks, underground utilities. Roles and Responsibilities: • Establish temporary bench mark in accordance to Qatar survey manual. • Prepare Setting-out plan drawing tie-in to QNG and extracting of local coordinates and level. • Setting-out with accuracy of all civil, structural, and architectural elements in accordance with QCS 2014 tolerances, QSM permitted deviation. • Taking As-built survey after completion of each activity • Prepare survey report in each survey activity. • Attending site survey inspection with consultant, site engineer, qaqc engineer. • Prepare as-built survey raw data report to incorporate in as-built shop drawing. Hyundai Engineering and Construction Co. Ltd. National Museum of Qatar Location: Doha, Qatar Job title: Land Surveyor Duration: October.20, 2013 to July .31, 2017 Work scope: Survey works in civil, structural, architectural, MEP, Road works, utilities & Infrastructures survey works. Roles and Responsibilities: • Establish temporary bench mark in accordance to Qatar survey manual. • Setting out of form works before inspection on all mock ups. • As built survey in steel nose fixing on secondary steel structure, • Layout of 66kv electrical feather lines on kharama substation. • As built survey on pumping station in eastern bay lagoon corniche road. • Setting out of road blocker at north zone on QAMU project. • Making survey data in attachment on RFIT by QAQC for inspection of consultant. • Transferring setting out, as built survey, layout coordinates in to AutoCAD, or civil 3d. and compare to approved shop drawings • Alignment of primary steel. • Stub alignment tangential and radial alignment. • Curvature as built on disk. • MEP ceiling fixtures layout, • Wall finishes layout, alignment and verticality. • Leveling of linear grille to circular grille in interior finishes at Qatar national museum project. External work Setting-out and alignment of Hardscape, water features, Roads • Pile cup on lagoon • Lagoon side slope/embankment • Curbstone and interlock • Potable, foul and storm water from formation, pipe alignment up to top cover level. • Setting-out and marking of Sub-grade, Sub-base course, base course, wearing course level, profile, cross fall, crown distance to tie-in connection on Ashghal road. Sami Group of Company. Technical Institute of Naval Study, Hospital, Residential (Compound) Location: Dammam Saudi Arabia Job title: Architectural Inspector Duration: September 2009 to 2012 Roles and Responsibilities: • Responsible for reviewing documents at various phases in accordance with project plans and supervision of on-going construction for the successful completion of the works. • Review and approval of shop drawing and material submittals as well as the technical supervision of senior and other inspectors. • Review the contractor’s progress at all times. • Monitor the work performed, material incorporated in the work and all materials stored on site. • Coordinate with fit-out contractors for site implementation / preparation and approval of mock-up at site before proceeding with the activity. • Continuous monitoring of fit-out installation at site to ensure quality and full compliance. • Coordinate the efforts of separate contractors. • Observe the safety procedures followed by the contractor and issue instruction as necessary to correct safety violations. • Attend weekly, monthly and other progress meetings held at the site to review the contractors progress and identify constrains and recommend corrective measures. • Assist the preparation and transmittal of site direction and instructions in conjunction with the Senior Architect. • Snagging and preparation of punch lists of items for corrective action following completion of construction in preparation for project hand over. • Reporting of non-conformances, site observations and Site deficiency reports. Tecarro College Foundation Inc. & Davao Doctors Hospital Location: Davao City, Philippines Job title: Draftsman / Site Inspector (civil and Architectural works) Duration: February 2008 up to 2009 Roles and Responsibilities: • Preparing Shop Drawing and detailing particularly Architectural, Civil works manual drawing and auto cad. • Site inspection ensuring actual works is in accordance to Design drawings, project specs, NBCP or PD1096 • Making of proposed design and floor plans • Purchasing materials • Completion of building credentials (bldg. permit to build, zoning, planning, sanitary, civil certificates) • Observe the safety procedures followed by the contractor and issue instruction as necessary to correct safety violations. F.A. Guevara Surveying and Engineering Location: Davao City, Philippines Job title: Land Surveyor / AutoCAD operator Duration: January 2005 up to 2007 Roles and Responsibilities: • Establish of horizontal and vertical control for topographic survey and checking profiles of road & proposed irrigation canal from Bincungan River to plantation pump house with a total length of 4 km. at LADECO, Hijo Banana plantation, Madaum, Tagum City. • Establish of horizontal and vertical control, topographic survey, cross sectioning and profiles of all existing roads and drainage for Gen. Santos City sewerage planning and design. • Establish of horizontal and vertical control for topographic survey Mining Claim Survey at Budbud, Bunawan, Davao City. Relocation surveys, subdivision surveys • Establish vertical and horizontal control for cadastral survey of Kapalong Davao del Norte municipality, and relocation of Brgy. boundary, • Preparing of Political boundary points in every Barangay, • Establish of GPS monument description Sheet in all Barangay boundaries.

Certificate of Interior Design March 18 2023 Austin Peay State University (Clarksville Tennessee) Registered and License Architect Registration No. 46180 (March 28 2019) Professional Regulation Commission (PRC) Bachelor of Science in Architecture and Fine Arts education October 30 2007 University of Mindanao (Davao City, Philippines) AutoCAD 2D & 3D May 29 2009 Technical Education and Skills Development Authority

Experience in AutoCAD Drawing 2d (2010-2018 VERSION), basic 3d & Isometric View, Basic 3dmax, Sketch up, Lumion 10.3.2, and Revit architecture basic. Operating Leica surveying instruments and software, experienced on surveying works. Excellent in time management skills. Has multi-tasking skills. Can work under pressure. Computer literate in MS Office (Word, Excel, Power Point,). Has a strong quantitative skill, a fast learner & can perform responsibilities with limited supervision.

-

As a architectural Inspector & land surveyor with 13 years’ work experience in GCC countries, I am abreast with each activity that happens onsite—from a project’s commencement until its completion. But more than my length of experience in the engineering industry, the management can always count on my sincerity, loyalty, and professional integrity to get even the most complex jobs done. Also, more than the roads, and other structures that I helped build, such as., 1. Main works Package for 974 Stadium and Precinct Project/ Lusail stadium external works package 2. National Museum of Qatar 3. Dammam Saudi Arabia (Technical Institute of Naval Study, Hospital, Residential) 4. Tecarro College Foundation. Inc. & Davao Doctors Hospital I would like to further build on my career as an Architect while at the same time raise the company’s productivity and promote its quality of service in all aspects.